The high suction flow vacuum generators are particularly adapted to applications involving porous and lightweight products. They offer a high suction flow, attaining an optimal vacuum level necessary for handling and transferring porous and lightweight objects. e.g.: powder, granules, carpet, foam etc.
Gripping very porous and lightweight products: foam, carpet, cakes, leather
Transport of powdery materials: powder, granules
Transporting small, lightweight objects: paper clips, rice, coffee
Smoke evacuation, depressurizing chambers, etc.
Functioning principle
Thanks to the COANDA effect (wall effect), the motor flux draws in air at room temperature. This physical phenomenon greatly amplifies the flow which results in very high suction produced with low consumption.
Special
Stainless steel versions are available on request
The five products present the best amplification ratio (consumption/suction flow). Coval can study smaller amplification ratios (higher consumption) but higher maximum vacuum for transporting heavy objects.
Operating requirements
Compressed air filtration at 5 microns for the M6C model and 20 microns for the other models.
Specifications
– Compressed air: Dry non-lubricated, 1.5 to 6 bar
– Materials: Aluminium body
– Temperature: -20°C to +80°C / -4 to 176°F
Products
Air amplifiers, M–C series
The high suction flow vacuum generators are particularly adapted to applications involving porous and lightweight products. They offer a high suction flow, attaining an optimal vacuum level necessary for handling and transferring porous and lightweight objects. e.g.: powder, granules, carpet, foam etc.
Air amplifiers, M–C series
Applications
Functioning principle
Thanks to the COANDA effect (wall effect), the motor flux draws in air at room temperature. This physical phenomenon greatly amplifies the flow which results in very high suction produced with low consumption.
Special
Operating requirements
Compressed air filtration at 5 microns for the M6C model and 20 microns for the other models.
Specifications
– Compressed air: Dry non-lubricated, 1.5 to 6 bar
– Materials: Aluminium body
– Temperature: -20°C to +80°C / -4 to 176°F