CCK.100 OIL FREE COMPRESSOR CCK.100
Dry vacuum pumps may run continuously only with clean, dry air.
Unlike other kinds of pumps, these may run at any pressure.
Maintenance is extremely simple, and consists merely of replacing the vanes and cleaning the filters.
The main areas of use include: suction cups conveyors, automatic machines, woodworking machines.
Dry rotary vane compressors have no particular restrictions on their use, except the maximum operating pressure which may not exceed the rated value, this is why we always recommend using a safety valve.
This series of compressors has the rotor installed on the shaft fixed by two bearings.
The motor is connected by a flexible coupling.
A powerful fan installed between the compressor housing and the motor ensures optimal cooling and a sturdy and compact housing protection keeps the noise level extremely low.
The compressor is equipped with a heat exchanger which reduces the temperature of the expelled air.
This series of pumps can operate at a maximum overpressure of 2.2mbar (50/60Hz) for no more than 15 minutes.
Standard equipment includes:
- Protective filter at the inlet
- Pressure relief valve
- Heat exchanger at the exhaust
WARNING: To avoid damage to the compressor or electrical motor it is recommended a pressure relief valve adjusted not to exceed the max pressure allowed for each unit shown in the table.