Manual Quick Change Adapter (QC-M-76) has been designed to cover the gap between fully automated press lines using automatic tool change systems, such as the ABB QC-M-76, and semi-automatic lines, where the tool change is done by robot operator’s.
The Manual Quick Change Adapter (QC-M-76) is mainly made of molded and machined parts of aluminium
On top of the QC-M-76 there is a mounting area including threaded holes for bolting to the manipulator. When the QC-M-76 is to be mounted on a robot, an adapter plate has to be fitted between the robot and the QC-M-76.
When the mechanical closed is fixed, the locking handle is pulling the tooling shaft into the QC-M-76 inner cone. At the same time, the pneumatic components are connected to the valves.
Products
Manual Quick Change Adapter
Components Grid:
Description
Manual Quick Change Adapter (QC-M-76) has been designed to cover the gap between fully automated press lines using automatic tool change systems, such as the ABB QC-M-76, and semi-automatic lines, where the tool change is done by robot operator’s.
The Manual Quick Change Adapter (QC-M-76) is mainly made of molded and machined parts of aluminium
On top of the QC-M-76 there is a mounting area including threaded holes for bolting to the manipulator. When the QC-M-76 is to be mounted on a robot, an adapter plate has to be fitted between the robot and the QC-M-76.
When the mechanical closed is fixed, the locking handle is pulling the tooling shaft into the QC-M-76 inner cone. At the same time, the pneumatic components are connected to the valves.